Beschreibung

Complete cylinder with CDI

FORCE MASTER 2

I-TECH 4-stroke

These absolutely reliable high performance oversized cylinders are designed and manufactured with CadCam system at Malossi premises in Calderara di Reno (Bologna), using known and proven calculations and technologies to redefine the new thermo-fluid dynamic cycle and the cooling system, as well as structural calculations.

These cylinders resulted to be exceptional for their amazing acceleration performance.

During the development process original cdis alone proved not to be sufficient to provide an adequate fuel supply to the engine. So Malossi decided to develop FORCE MASTER 2: an additional cdi with special maps capable to optimize carburetion.

With the usual carefulness and the use of sophisticated methods and instruments, Malossi engineers have managed to adjust carburetion point by point, from minimum to maximum and vice versa, avoiding any engine hesitation.

Cylinder

  • Bore: Ø 67 mm
  • Stroke: 47 mm
  • Displacement: 166
  • Compression ratio: 12:1
  • Material: primary aluminium alloy with a high content of hardened and tempered silicon, cylinder liner with silicon carbide coating in a galvanic nickel die and crossed smoothing with two diamond passages with very limited tolerances.
  • Machining: on machine tools with high precision numerical control.
  • Cylinder-piston connection with an allowance of 0.05 mm.
  • Recalculated and upgraded heat exchange surfaces.

Piston

  • Ultra compact with 3 rings
  • Material: special aluminium alloy with high silicon content, low thermal expansion and a tin facing on the sliding surfaces.
  • Machining on machine tools with numerical control.
  • Lightened and reinforced.
  • Upgraded heat exchange surfaces.

Piston rings

  • Special rings with high sliding ease and very high mechanical resistance.
  • I° ring compression in nitrided and chromium steel.
  • II° special cast iron ring.
  • Three - piece scraper ring made of chromium-plated special steel alloy.

CDI FORCE MASTER 2 - Code 5515327

  • Carburation adjusting
  • ± 20% at min/medium/max
  • RPM limiter: + 1000 RPM
  • 4 different maps:
    • curve 0: original cylinder, original camshaft, Malossi exhaust system with DB killer
    • curve 1: Malossi cylinder, original camshaft, original exhaust system
    • curve 2: Malossi cylinder, original camshaft, Malossi exhaust system with DB killer
    • curve 3: Malossi cylinder, original camshaft, Malossi exhaust system with DB killer, Malossi air filter

 

 

APRILIA-RS4-125

Kompatible Marken und Modelle

Marke Modell
APRILIA APRILIA RS4 125 ie 4T LC euro 3
APRILIA APRILIA RS 125 ie 4T LC euro 4 2019->2020 (M545M)
APRILIA APRILIA RS GP Replica 125 ie 4T LC euro 4 2019->2020
APRILIA APRILIA RX 125 ie 4T LC euro 4 2019->2020
APRILIA APRILIA SX 125 ie 4T LC euro 4 2018->2020 (M545M)
APRILIA APRILIA TUONO 125 ie 4T LC euro 4 2019->2020
DERBI DERBI Senda DRD 4V R - SM 125 ie 4T LC euro 3

Ersatzteile

Produktbezeichnung Code Preis
kpl zyl.dichtungssätze ø 67 für original zyl.kopf kpl zyl.dichtungssätze ø 67 für original zyl.kopf 1114768b 114,07€ Einkaufswagen
kolbenbolzen kpl. ø 15x08x46 kolbenbolzen kpl. ø 15x08x46 2312423 20,75€ Einkaufswagen
alum-zylinder ø 67 bolz.ø 15 h2o 4-stroke alum-zylinder ø 67 bolz.ø 15 h2o 4-stroke 3115326 519,92€ Einkaufswagen
kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings 0 kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings 0 3415093 148,05€ Einkaufswagen
kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings 00 kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings 00 3415093.00 148,05€ Einkaufswagen
kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings a kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings a 3415093.a0 148,05€ Einkaufswagen
kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings aa kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings aa 3415093.aa 148,05€ Einkaufswagen
kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings b kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings b 3415093.b0 148,05€ Einkaufswagen
kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings bb kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings bb 3415093.bb 148,05€ Einkaufswagen
kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings c kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings c 3415093.c0 148,05€ Einkaufswagen
kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings cc kolben ø 67 bolz.ø 15 -3 ringe rech./ölabstreifrings cc 3415093.cc 148,05€ Einkaufswagen
kolbenringsatz ø 67 1 recht./2 ölabstreifrings kolbenringsatz ø 67 1 recht./2 ölabstreifrings 3511291 65,32€ Einkaufswagen
c - kolbenbolzenclip ø 15x1 c - kolbenbolzenclip ø 15x1 3611398b 0,35€ Einkaufswagen
force master 2 elektr.-zündbox zyl. i-tech 4 stroke force master 2 elektr.-zündbox zyl. i-tech 4 stroke 5515327 342,58€ Einkaufswagen

Download

alum-kpl zylinder ø 67 bolz.ø 15 h2o i-tech 4-stroke

692,05
In den Einkaufswagen legen