Pinion K-DRIVE z29
Sold and shipped by: RESILIENZA LUXEMBOURG SÀRL-S
After your purchase, you have the right to withdraw from the contract within 14 days, in all and any cases, without the need to justify or specify the reasons for the withdrawal.
Description
MALOSSI K-DRIVE
Malossi K-DRIVE is a lighter gear ratio than the
original for the Yamaha Tmax 530 and Kymco AK
550.
Characterised by a sought-after appearance, the
K-DRIVE crowns and pinions have different ratios
to satisfy all the rider’s requirements.
Pinion
6117983B Z 24
6117984B Z 27
6117986B Z 28
6117985B Z 29
Crown
6117988B Z 56
6117982B Z 57
6117987B Z 58
| COUPLING TABLE K-DRIVE CROWN - PINION | |||
| Pinions | Crowns | Ratio | % Ratio |
| 24 | 59 | 2,458 | - 8.3% |
| 26 | 59 | 2,269 | Original |
| 26 | 58 | 2,230 | + 1.7% |
| 27 | 59 | 2,185 | + 3.7% |
| 27 | 58 | 2,148 | + 5.3% |
| 27 | 57 | 2,111 | + 6.9% |
| 28 | 59 | 2,107 | + 7.1% |
| 28 | 58 | 2,071 | + 8.7% |
| 29 | 59 | 2,034 | + 10.4% |
| 28 | 57 | 2,035 | + 10.4% |
| 28 | 56 | 2,000 | + 11.9% |
| 29 | 58 | 2,000 | + 11.9% |
| 29 | 57 | 1,965 | + 13.4% |
| 29 | 56 | 1,931 | + 14.9% |
TECHNICAL SPECIFICATIONS
The pinions are made from aluminium with hard oxidisation 25 microns deep.
With this treatment Malossi has maintained a particularly light shape of the piece whilst guaranteeing high wear
resistance.
The central hub is made from a special steel alloy, not heat treated in order to avoid making it too hard and thus
causing friction problems with the motor transmission shaft.
The following tooth options are proposed z.: 24. 27. 28. 29.
Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use
Compatible brands and models
| Brand | Model |
|---|---|
| KYMCO | KYMCO AK 550 ie 4T LC euro 4 2017->2020 (SAA1) |