Price

180.56€ -10% 162.50€

Available Sold and shipped by: Malossi Spa

Add to cart

kit fly clutch

Code: 5218223

Model: piaggio si 50 2t

Read more

Description

KIT FLY CLUTCH

Complete rear transmission for Piaggio mopeds with variator


The FLY CLUTCH Kit is interchangeable with the original transmission and improves performance and durability owing to the use of high-quality materials and reinforcing it where required.

  1. Fixed Pulley
  2. Torque Driver
  3. Yellow variator contrast spring
  4. Fly Clutch
  5. Assembled fixed hub

For vehicles with variators.

 

1 . Fixed Pulley

The 102mm-diameter, fixed, 15mm pulley is nitride hardened to produce excellent levels of durability, has a positive double “D” mount on the hub and is secured with an M24 galvanized nut.


2 . Torque Driver

This consists of a 15° pulley with a diameter of 102 mm, which is TIG welded to a specially designed hub with a mould-pressed EKU bushing. EKU is a dry self-lubricating material that ensures excellent sliding properties and minimal wear.
Adaptable even to the original Piaggio system.


3 . Variator Contrast Spring

The springs, made of high-carbon silicon-alloy steel and are heat-treated, are dynamically balanced, stove-enamelled and designed for each specific application.


4 . Fly Clutch

Fly Clutch consists of three new clutch shoes that use the Fly Malossi system. Designed with a specific shoe, it is coupled with Malossi springs to operate at a pre-established optimum RPM hook-in point. Once mounted on the hub assembly, the shoes are secured in position using a reinforced ring, which makes the entire assembly rigid.


5 . Assembled Fixed Hub

This is the main structural component of the clutch.
Its multifunctional elements include: a clutch shoe plate, a chrome hub in which the moving pulley operates and a clutch bell that allows the kick-starter pedal to engage and lock.
The assembly is TIG welded to the tightest tolerances to ensure perfect alignment. The pivot pins for the shoes have been increased in diameter by 6.5 mm and specially designed to be riveted and maintain alignment.
A primary gear shaft rotates within the unit that is held using two 13x19x12 needle bearings, providing increased rigidity.
Two oil seals ensure a sealed environment for Malossi lubrication.


 

Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use

Compatible brands and models

Brand Model
PIAGGIO PIAGGIO BRAVO 50 2T
PIAGGIO PIAGGIO BOSS 50 2T
PIAGGIO PIAGGIO BOXER 50 2T
PIAGGIO PIAGGIO CIAO 50 2T
PIAGGIO PIAGGIO CIAO PX 50 2T
PIAGGIO PIAGGIO GRILLO 50 2T
PIAGGIO PIAGGIO SI 50 2T
PIAGGIO PIAGGIO SUPERBRAVO 50 2T

Spare parts

Product name Code Price
reinforcing steel flange reinforcing steel flange 0718479b 12.20€ Cart
2 nuts fixing half-pulley 2 nuts fixing half-pulley 19 6481.j0 9.65€ Cart
overhaul kit for fly clutch overhaul kit for fly clutch 2019764 23.79€ Cart
assembled fixed hub assembled fixed hub 2318640b 61.00€ Cart
yellow variator adjuster spring (external ø 45x77 mm - ø wire 3.9 mm - k 8.4) yellow variator adjuster spring (external ø 45x77 mm - ø wire 3.9 mm - k 8.4) 29 7009.y0 9.99€ Cart
3 red reinforced clutch springs ø 2 for delta and fly clutch 3 red reinforced clutch springs ø 2 for delta and fly clutch 29 8743b 9.76€ Cart
wgt kit for kit fly clutch wgt kit for kit fly clutch 5219024 35.99€ Cart
torque driver torque driver 6118221b 48.80€ Cart
fixed half-pulley fixed half-pulley 6118222b 20.30€ Cart

Download

kit fly clutch

162.50€
Add to cart