Description

Thus, the Over Range is renewed as well: new variator!

This new system is based on Multivar MHR Next, which – matched with the other parts - allows to achieve really unique performances!

The torque driver (movable pulley) has a larger diameter compared to the original one and the very latest specifications, allowing to have a greater velocity-ratio range compared to the original pulley.

Malossi engineers have also taken particular care in realising this pulley right down to the smallest detail, using special materials and a particular type of thermochemical treatment that ensures exceptional surface hardness and therefore excellent wear and abrasion resistance.

The fixed half-pulley completes the OVER RANGE: this component features a diamond finish of the belt-side pulley surface and a redesigned working angle to further increase the gearing range.

The whole completion of OVER RANGE system is given by the torsion controller.

NB: When you install the Malossi over range, ABSOLUTELY DO NOT USE the shim supplied with the variator, as the belt would hit the crankcase.

Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use

Faq

• Does the washer supplied in the variator have to be fitted when fitting the over-range?

  The washer absolutely must not be fitted at all, his would create interference between the belt and engine case.